Magnum Pro Calibration Pumps

Calibration Pumps from Vacuum to 10,000 PSI. Each Magnum Pro calibration pump uses our unique patented design, utilizing a Schrader valve instead of a needle valve, dual O-rings on all pistons as well as other enhancements. These innovations have earned our calibration pumps the reputation of being indestructible.

Division: 

Calibration Pump Accessories

High Pressure Dirt/Moisture Trap

Liquid trap with male Quick-test top port, female Quick-test bottom port. Eliminates unwanted fluid or moisture that can contaminate any gas system. Features High Pressure (600 psi / 41 bar) is ideal for pneumatic systems like the MVP-600Inlet Connection: 1/4” Male NPT X 5854P Quick disconnectOutlet Connection: 1/4” Female NPT X 5854P Quick-disconnectLarge volume trap requires little maintenanceQuick-release lid allows for easy cleaning of dirt or liquid without toolsInlet and Outlet connections compatible with Magnum Pro High Pressure HosesMade of aluminum and stainless steel, Weight: 1.2 lbs Includes Liquid trap(1) ¼” Male Quick-disconnect(1) ¼” Female Quick-disconnect

Category: 

M-Series Analog Gauge

The M-Series Analog Gauge comes in a variety of display sizes and ranges to suit our exact needs. The protective rubber boot will ensure it the best protection from the rugged life inside the power plant.


Features

Dial 2.5" diameter (Model M-2)
Dial 4" diameter (Model M-4)
Dial 6" diameter (Model M-6)
Laminated safety glass
Pointer is adjustable
Protective rubber boot
Hermetically sealed / weather proof
Welded case and connection
Liquid fillable / no kit required

Specifications

Case is stainless steel
Bourdon tube (AISI 316 Stainless Steel)
Socket (AISI 316 Stainless Steel)
Movement (304 SS Heavy Duty Bushed)
Accuracy 0.5% Full Scale (ANSI Grade 2A)

Range

Available in 3 sizes: 2, 4, and 6 inches
Available in over 25 pressure ranges!

Category: 

Magnum Pro Calibration Hoses

Magnum Pro high pressure calibration hoses are flexible but will not stretch. Features Will not leakNo stretch for fast stabilizationWorks with any calibrator, gauge, or pump Specifications 10,000 psi working pressure32,000 psi burst pressurePneumatic & hydraulic Distributer ResourcesSmall in diameter (3/16" OD)Any length available Models HK-1 Standard Hose, 1/8" NPT male x 1/8" NPT female 2'long.HK-600 Standard Hose, 1/8" NPT male x 1/4" NPT female 2' long.HK-4F-MM-3 High Pressure Hose, 1/4" NPT female x mini mess female 3' long.HK-4F-MM-5 High Pressure Hose, 1/4" NPT female x mini mess female 5' long.

Category: 

Calibration Pumps

M-10 Hydraulic Calibration Hand Pump

Utilizes a fully adjustable stroke control to allow for quick priming, easy pumping, and fast pressure generation up to 10,000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the patented triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The pump has over-sized check valves to provide smooth controlled operation.


0 - 10,000 PSI (700 Bar)
Compatible with most hydraulic fluids, oils and water
Connections (2 ports) 1/4" NPT/BSP
Weight - 3 lbs
Made in the USA

Features

Contoured cushion handles
Patented protective cage around vent knob
Priming feature
Patented triple filtration (prevents pump failure caused by dirt)
A non-oil based lubricant is used on all moving parts
Built in pressure relief valve (prevents over pressurizing)
Shatter proof reservoir
Oversized check valves for smooth controlled operation
2 year "quibble free" warranty (includes dropping)

Category: 

MP-P Pressure Calibration Pump

Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.


0 - 100 PSI (7 Bar) (including and not limited to an inch of water)
Connections (2 ports) 1/8" NPT/BSP
Weight - 1 lb
Made in the USA

Features

Delrin® Plastic handle prevents body heat transfer
Oversized check valves for smooth controlled operation
Mash proof vent valve (No Needle Valve)
A patented non-oil based lubricant is used on all moving parts
Dual O-Rings on all pistons to ensure zero leakage
Recessed vent knob to prevent damage from dropping
2 year "quibble free" warranty (includes dropping)

Category: 

MP-V Vacuum Calibration Pump

Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.


Specifications


28"Hg (Vac) to 0 PSI

Connections (2 ports) 1/8" NPT/BSP

Weight - 1 lb

Made in the USA


Features


Delrin® Plastic handle prevents body heat transfer

Oversized check valves for smooth controlled operation

Mash proof vent valve (No Needle Valve)

A patented non-oil based lubricant is used on all moving parts

Dual O-Rings on all pistons to ensure zero leakage

Recessed vent knob to prevent damage from dropping

 

2 year "quibble free" warranty (includes dropping)

Category: 

MVP-600 Pneumatic Calibration Hand Pump

Produces pneumatic pressure and vacuum to check calibration of gauges, switches, transmitters, and recorders. The contoured cushioned handles provide extra comfort while preventing the pump from sliding. The over-sized check valve provides smooth operation throughout the output range while the dual o-rings on all pistons ensure zero leakage. Patented Mash proof vent valve comes standard on all MVP-600s (No Needle Valve) and a non-oil based lubricant is used on all moving parts.


Specifications

Vacuum 28"Hg to pressure 600 PSI / 40 BAR (combination pump)
Compatible with all gauges and calibrators
Connections (2 ports) - 1/4" and 1/8" NPT/BSP
Weight - 2lbs
Made in the USA

Features

 

Contoured cushion handles
Oversized check valve for smooth controlled operation
Mash proof vent valve (No Needle Valve)
A patented non-oil based lubricant is used on all moving parts
Dual O-Rings on all pistons to ensure zero leakage
2 year "quibble free" warranty (includes dropping)

Category: 

Magnum Low Pro Volume Pressure Chamber M-80

Capable of extremely high resolution (0.0001 psi) as it spans the range of near absolute vacuum to low pressures (30" Hg - 80 PSI). It's rugged outer housing and dual o-ring design ensures zero leakage. Not only is the M-80 bench mountable, but it’s relative light weight (3.5 lbs) makes it perfect for field use as well. Optional power drive supplied to rotate the vernier at a quicker pace in-order to speed up your calibrations.


Near absolute vacuum (30"Hg) to 80psi
Resolution 0.0001psi
Bench mountable
Weight - 3.5lbs
M-80KT version includes rechargeable lithium batteries. M-80KT, M-80WIN and M-80TH versions allow the user to rapidly span the range without having to manually turn the knob by including a patented power drive.

Features

Extremely high resolution
Excellent stability for low pressure calibrations
Dual O-Rings
2 year "quibble free" warranty

Category: 

PP-4 Magnum Pro Pneumatic Power Pump

Fluids in a transmitter or delicate system have always been a concern. East Hills Instruments introduces the only fully versatile pneumatic pump capable of generating pressure up to 4,000 psi without liquid. Two support legs fold out to stabilize the PP4 and the pump can be operated by either foot or hand. The fine vernier control allows the pressure to be finely adjusted and sealed off to prevent slow leaks.

Specifications

0 to 4,000 PSI (275 Bar)
Connections (2 ports) 1/4" NPT/BSP
Weight - 15 lbs
Made in the USA

Features

No heavy nitrogen bottles necessary
No contamination of process system with oils and water
Won’t freeze in low temp from water intrusion
Folds up to a mailing tube sized case
Can be used on a bench or taken out to the field
2 year "quibble free" warranty (includes dropping)


Category: